Category Archives: Videos
MVP Hydra, Technical Service, Videos
Synesso Technical Service: Installing a MVP Hydra with a Line Boost System
First, we will attach our filtered water source (we use a braided hose in the video) to the inlet of the boost pump. Then connect the output line (marked in red) of the boost pump to the inlet of the pressure regulator using the supplied braided hose. You will also connect the steam fill line…
Tools Required: Two 7/16” wrenches 9/16” wrench Flat head screwdriver Food grade lubricant Blue Loctite Teflon O-ring (Synesso part no. 1.4622) The first step is to loosen (do not remove) the 9/16” bolts on both sides of the machine and remove all flat head screws along the lower edge of the upper front panel. Pull…
Let us dive in and check out what these new machines offer! We approached the new S200 and S300 starting with a conversation about how to create a different designed machine that was more accessible in price point and to a barista stepping up to the machine. The S-Series is all about achieving a more…
To check your grouphead flow rate, remove the basket from your portafilter and ensure the dispersion screen and screw are installed. Engage the grouphead at full brew pressure and use a shot glass or other container with a known volume to measure the quantity of water dispensed. You should get around two ounces of water…